Radiohobby.nl

Hét forum over radiocommunicatie!
Het is nu 25 mei 2022 11:19

Alle tijden zijn GMT + 1 uur




Plaats een nieuw onderwerp Antwoord op onderwerp  [ 1 bericht ] 
Auteur Bericht
Ongelezen berichtGeplaatst: 30 dec 2021 16:51 
Offline
Member

Geregistreerd: 21 dec 2015 22:26
Berichten: 15
Woonplaats: Russia
2021-12-30, revision 7094:
- A new version AlterFRN-client :
--- ATTENTION !!!! AlterFRN-the client is using the version of the library portaudio v.19.7.0 from 2021-04-06, which names audio devices under Linux another way. Sound device names may change. Use the audio (0.4.2) and audioconfig (0.4.3) commands to check and / or update valid audio device names. On the MS Windows the filename for the library has changed: portaudio32_2.dll...
--- Fixed problem starting daemon AlterFRN-client with command parameter daemon(0.4.11) on Linux together with the established PulseAudio...
--- Fixed the problem of deactivating the output line PTT(3.1) in some circumstances when using the service disconnect sound from the server. See also parameters EnableDisconnect(9.28) and SoundDisconnect(9.29) from section [Sounds](9) .
--- Fixed the ability to set incorrect values ​​in the field BandChannel(1.3) from section [Auth](1) in mode ClientType=GATEWAY(1.2.3) .
--- Fixed a bug in the output line CONNECT(3.18) .
--- Changed the masking scheme for field separator characters (:;) inside field values ​​for describing control lines (3.4) - it is necessary to use the preceding '\' character, the '\' character inside values ​​must also be masked.
--- Added the ability to set special sounds ROGER(RADIO EOT)for specific correspondents and / or gateways. See also parameters RogerSoundCfgEnabled(9.30) and RogerSoundCfgFileName(9.31) from section [Sounds](9) .
--- Added parameters PttEnable(3.19) and CosEnable(3.20) per section Radio(3) for initial setting of control lines PTT(3.1) and COS(3.2) respectively.
--- [Linux-ARM only] Added new port interface for control lines GPIODEV(3.4.1.7) in addition to the declared deprecated interface GPIO-SYSFS(3.4.1.3) . To activate the interface GPIODEV package needs to be installed gpiod and the library libgpiod2...
--- Added commands network(0.4.34) and networks(0.4.35) to get current information about networks (rooms).
--- Added commands pttstatus, cosstatus, radiostatus(0.4.36) to check the current mode of control lines PTT(3.1) and COS(3.2) .
--- Added command serverlevel(0.4.38) - show the level of the input sound signal from the radio station taking into account all the settings of the input sound in the configuration file.

Download


Omhoog
 Profiel  
Antwoord met een citaat  
Geef de vorige berichten weer:  Sorteer op  
Plaats een nieuw onderwerp Antwoord op onderwerp  [ 1 bericht ] 

Alle tijden zijn GMT + 1 uur


Wie is er online

Gebruikers op dit forum: Geen geregistreerde gebruikers. en 1 gast


Je mag geen nieuwe onderwerpen in dit forum plaatsen
Je mag niet antwoorden op een onderwerp in dit forum
Je mag je berichten in dit forum niet wijzigen
Je mag je berichten niet uit dit forum verwijderen

Zoek naar:
Ga naar:  
Powered by phpBB® Forum Software © phpBB Group
phpBB.nl Vertaling